page_banner

SepaFlash™ iLOK™ Series

SepaFlash™ iLOK™ Series

Short Description:

SepaFlash iLOK™ flash cartridges offer users convenience for manual assembly, allowing for a flexible sample loading method: solid load and direct liquid injection.

※ 3 kinds of iLok flash cartridge for choose, including empty cartridge, pre-packed cartridge and 75% pre-packed cartridge.


Product Detail

Application

Video

catalogue

Product Introduction

SepaFlash™ iLOK™ flash cartridges offer users convenience for manual assembly, allowing for a flexible sample loading method: solid load and direct liquid injection. The series is offered in three formats: iLOK™ flash cartridge pre-packed with UltraPure silica gel, iLOK™ SL cartridge which is pre-packed with 85% column volume of silica gel and iLOK™ empty solid load cartridge comes with screw cap, frits, disbursing unit, O-ring and end tips.

※ Innovative column design is convenient for manual assembly and column stacking.
※ Available in a wide range of cartridge sizes for any situation.
※ Reinforced cartridge body with the maximum operating pressure up to 200 psi.

Ordering Information

iLOK™ Flash Cartridges (pre-packed, UltraPure irregular silica, 40−63 µm, 60 Å)
(surface area 500 m2 /g, pH 6.5–7.5, loading capacity 0.1–10%)

Item Number Column Size Sample Size Flow Rate (mL/min) Cartridge Length (mm) Cartridge ID (mm) Max. Pressure (psi/bar) Quantity per Box
Small Large
SD-5101-004 4 g 4 mg–0.4 g 15–40 115.1 12.8 200/13.8 24 120
SD-5101-012 12 g 12 mg–1.2 g 30–60 137.8 21.4 200/13.8 24 108
SD-5101-025 25 g 25 mg–2.5 g 30–60 188.2 21.6 200/13.8 20 80
SD-5101-040 40 g 40 mg–4.0 g 40–70 188.7 26.8 200/13.8 12 48
SD-5101-060 60 g 60 mg–6.0 g 60–150 173.3 36.6 200/13.8 12 24
SD-5101-080 80 g 80 mg–8.0 g 50–100 263.5 31.2 200/13.8 10 20
SD-5101-100 100 g 100 mg–10 g 80–220 146.6 60.4 150/10.3 6 12
SD-5101-120 120 g 120 mg–12 g 60–150 277.7 36.6 200/13.8 8 16
SD-5101-220 220 g 220 mg–22 g 80–220 218.5 60.6 150/10.3 4 8
SD-5101-330 330 g 330 mg–33 g 80–220 271.6 60.6 150/10.3 2 5

※ Compatible with all flash chromatography systems on the market.

iLOK™ Empty Solid Load Cartridges
(iLOK™ empty solid load cartridge with screw cap, frits, disbursing unit, O-ring and end tips.)

Item Number  Description  Volume (mL)  Cartridge Length (mm)  Cartridge ID (mm)  Max. Pressure (psi/bar)  Quantity per Box 
Small Large
SD-0000-004 Empty solid load cartridge, 4 g 8 115.1 12.8 200/13.8 24 120
SD-0000-012 Empty solid load cartridge, 12 g 27 137.8 21.4 200/13.8 24 108
SD-0000-025 Empty solid load cartridge, 25 g 46 188.2 21.6 200/13.8 20 80
SD-0000-040 Empty solid load cartridge, 40 g 70 188.7 26.8 200/13.8 12 48
SD-0000-060 Empty solid load cartridge, 60 g 104 173.3 36.6 200/13.8 12 24
SD-0000-080 Empty solid load cartridge, 80 g 147 263.5 31.2 200/13.8 10 20
SD-0000-100 Empty solid load cartridge, 100 g 176 146.6 60.4 150/10.3 6 12
SD-0000-120 Empty solid load cartridge, 120 g 215 277.7 36.6 200/13.8 8 16
SD-0000-220 Empty solid load cartridge, 220 g 376 218.5 60.6 150/10.3 4 8
SD-0000-330 Empty solid load cartridge, 330 g 539 271.6 60.6 150/10.3 2 5

※ Compatible with all flash chromatography systems on the market.

Configurations for solid loading

Solid sample loading have the technique to load samples to be purified onto a column, particularly in the case of low-solubility samples. On this occasion, iLOK™ flash cartridge is a very suitable choice.

The sample is dissolved in a suitable solvent and absorbed onto diatomaceous earth. After removal of the residual solvent, the adsorbent is put on top of partly filled cartridge or into an empty cartridge.

ilok

  • Previous:
  • Next:

    •  AN005-SepaFlash™ Large Purification Products for Hundreds of Grams of Samples
      AN005-SepaFlash™ Large Purification Products for Hundreds of Grams of Samples
    Write your message here and send it to us